Are you looking for a terrace or façade solution that looks modern and elegant, while staying comfortable to use for years? Liderwood has introduced new products created exactly for these needs: Solid XL decking boards, Premium Asymmetric Façade Slats and decorative profiles for finishing details. These products are designed for those who value the durability of composite materials, the elegant look of wood and maintenance-free solutions.













Power Supply for Fence Post LED Lamps – Super Slim | 24V DC | 60W
Out of stock
Description
Professional LED power supply with an exceptionally slim design, created for the most demanding lighting installations. With a width of only 18 mm, it is the ideal solution for installation in places where standard power supplies simply do not fit – e.g., in fence posts.
Key features:
- Long & slim design: The exceptionally long and narrow shape allows for installation inside fence posts, decorative strips, and narrow LED profiles.
- Voltage stabilization: Precise 24V DC voltage eliminates flickering and voltage drops, ensuring uniform illumination along the entire length of the line.
- Full Hermeticity (IP67): it is 100% dustproof and resistant to strong water jets, moisture, and short-term immersion.
- Ideal for outdoor applications
Application
Powering linear LED lamps, lighting for fence posts
How many lamps can you connect?
The 60W power supply (maintaining a power reserve) allows for powering:
- up to 5 lamps 150 cm (9W)
- up to 10 lamps 80 cm (5W)
- or a combination, e.g., 3 × 150 cm + 4 × 80 cm; 4 × 150 cm + 2 × 80 cm
Always leave a power reserve – at least 10–20% – so the power supply works without overload and ensures long-lasting, reliable operation.
If you plan a larger number of lamps, add another power supply and divide the installation into sections.


Parameters
| Dimensions | 37,5 x 1.8 x 1.5 cm |
|---|---|
| Maximum Power | 60W |
| Input Voltage | 180-260 V |
| Output Voltage | 24V DC (constant) |
Assembly and documents
LED lamp installation manual for fence posts
- Insert the lamp into the post profile – slide the lamp from the top into the dedicated slot in the post (intended for lamps or strips installation)
- Route the lamp cables – lead them to the inside of the post or through the hole in the base
- Connect the lamp to the power supply (see instructions below)
- Place the power supply in a dry place (e.g., airtight junction box, technical box)
- Connect the power supply to the power source and test:
- Once the lamp and 230V power supply are connected, the lamp should light up.
- Check for proper operation – no flickering, uniform light.


Manual for connecting a linear LED lamp to a 60W 24V power supply
- Prepare the components:
- Linear LED lamp (24V DC)
- 60W / 24V DC power supply
- 230V power cable (with a plug or for a junction box)
- Connect 230V power to the power supply ("INPUT"):
- L (phase) – brown wire
- N (neutral) – blue wire
- ⏚ (PE ground) – yellow-green wire
- Connect the lamp to the power supply output ("OUTPUT"):
- V+ – red wire from the lamp (plus)
- V– – black wire from the lamp (minus)
- If the power supply has 2 pairs of V+ and V–, you can use either one.
- Check the connections:
- Ensure that all screws are firmly tightened.
- Ensure polarity compliance (red to V+, black to V–).
- Connect the power supply to 230V power:
- Insert the plug into the socket or connect the cable to the installation.
- The lamp should light up after a moment.


Important notes:
- Do not work with the power connected – always disconnect the power first.
- Do not exceed the maximum power of the power supply – leave at least 10–20% reserve.
Ask about the product
Do you have a question about this product?
Write to us — we will be happy to help and answer all your questions.











